Industrial Brake for Bridge Overhead Crane Electro Magnetic Hydraulic Windlass CE

• Certification: ISO, CE, SGS
• Condition: New
• Working Mode: Intermittent
• Installation: Horizontal
• Usage: Construction Machinery, Crane Parts
• Power Source: AC 380V, 3 Phase, 50 Hz
• Model NO.: ED
• Applications: Building Material Shops
• Color: Clients′ Requirments
• Shipping Method: Sea/Air/Express
• Brake Wheel Diameter: 100-800mm
• Transport Package: Standard Export Package
• Specification: customizable
• Trademark: HUASUI
• Origin: Henan
• HS Code: 8483900090
• Production Capacity: 100

Product Description

Product Description

ED Series electro hydraulic thruster is a compact drive control device integrating motor, centrifugal pump and oil cylinder. It is widely used as a drive device for various block brakes and disc brakes, as well as for various industrial valves and gates. , Directional swing and rotation (<90°) device and drive control of clamping device

Conditions of use
1.Ambient temperature: -20ºC~50ºC use DB-25 hydraulic oil, below -20ºC use YH-10 aviation hydraulic oil, no heater; With DB-25 hydraulic fluid, must 
A heater must be installed.
2.Continuous work S1, intermittent work S3-60%.
3.Voltage and frequency: three-phase AC 380V/50(60)Hz, our company can also provide other different frequency, different voltage products, please negotiate to order when necessary.
4.Three-phase AC asynchronous motor, in accordance with the regulations (GB755-2000), the performance is detailed in "Technical data".
Insulation class: F, electrical protection class: IP65.
5. Cable: The maximum cross section of the wire is 4X2.5mm2.
6. Efficient anti-corrosion products: for corrosive media in the air and high relative humidity, and may generate condensate. The stator of the motor is made of vacuum injection molding and painted
With special anti-corrosion paint, series of products can provide anti-corrosion products, users need to contact the company

Detailed Photos

Features

1.The piston rod adopts advanced protective measures to reduce wear and anti-corrosion, with double-layer dust seal and hydraulic system
The oil chamber seal adopts double sealing ring, which greatly improves the service life.
2. Connecting rod can be rotated 360°.
3. Additional devices are shown in the attached table.

Technical Specifications

 

Model	Rated thrust (N)	Rated travel (nm)	Brake spring force(N)	Return spring force(ON)	Rated frequency(HZ)	Input power(QN)	Rated voltage(V)	Rated current (A)	Maximum operating frequency (h)	Weight(Kg)
Short stroke pusher
E d235	220	50	180	100	50	165	380	0.52	2000	10
Ed305	300	50	270	95	50	200	380	0.46	2000	14
Ed404	400	40	270	95	50	200	380	0.46	2000	14
E d50,6	500	60	460	267	50	210	380	0.48	2000	21
Ed705	700	50	460	267	50	210	380	0.50	2000	21
E d80,6	800	60	750	267	50	330	380	1.42	2000	24
Ed121/6	1250	60	1200	700	50	330	380	1.44	2000	39
E d201,6	2000	60	1900	700	50	450	380	1.45	2000	39
E d3016	3000	60	2700	700	50	550	380	1.46	1500	40
Long stroke pusher
Ed50/12	500	120			50	210	380	0.48	1200	26
E d80/12	800	120			50	330	380	1.42	1200	27
Ed121/12	1250	120			50	330	380	1.44	1200	39
E d201/12	2000	120			S0	450	380	1.45	1200	39
E d301/12	3000	120			50	550	380	1.46	900	40
Ed630A2	6300	120			50	1100	380	2.4	630

  Dimentions

 

Model	A	B		D	E	F	6	H	K			N	0	P	0	R	S	T	U	V
E d23/5	286	50	26	12	12	20	16	20	160	80	80	40	200	16	85	55	75	98	20	15
Ed30/5	2370	50	34	15	16	25	16	18	160	80	80	40	197	16	85	55	75	98	20	15
E d40,4	377	40	41	15	16	30	16	18	160	80	80	40	197	16
Ed50,6	435	60	36	18	20	30	20	23	190	95	120	60	254	22	85	55	75	100	22	15
Ed705	430	50	31	17	20	30	20	24	190	95	100	41	254	22
Ed80,6	450	60	36	18	20	30	20	23	190	95	120	60	254	22	85	55	75	100	22	15
Ed50/12	515	120	36	18	20	30	20	23	190	95	120	60	254	22
E d80/12	530	120	36	18	20	30	20	23	190	95	120	60	254	22
Ed121,6	645	60	38	25	25	40	25	35	240	112	90	40	260	25	130	80	120	147	35	20	130
E d201,6	645	60	38	25	25	40	25	35	240	112	90	40	260	25	130	80	120	147	35	20	130
E d3016	645	60	38	25	25	40	25	35	240	112	90	40	260	25	130	80	120	147	35	20	130
Ed121/12	705	120	38	25	25	40	25	35	240	112	90	40	260	25							190
Ed201/12	705	120	38	25	25	40	25	35	240	112	90	40	260	25							190
Ed301/12	705	120	38	25	25	40	25	35	240	112	90	40	260	25							190
Ed630A2	865	120	38	25	25	40	25	40	270	127	110	60	327	25

company information

 

 

Huasui has 15 years of experience in crane and hoist design and manufacturing, 3 production factories covering an area of 168000 square meters, 10 production lines with annual production capacity 500 sets. It has more than 800 employees, including more than 20 technicians and more than 10% senior engineers. The factories have modern crane manufacturing and assembly equipment, and introduces European advanced management, process flow and quality control system to ensure safe, reliable and high quality cranes for customers, making customers' logistics operations easier and creating long-term value for customers.

Our Advantages

packaging and transportation

Factory picture

Certifications

FAQ

A: Can you provide custom service?

B: Yes! We can customize all kinds of cranes according to your requirements. You just need to tell us your demands.
A:Which industries do you service?

B: We service many industries including machinery, metallurgy, railway and so on. High quality products in different fields will play an important role.
A:Which areas do you service?

B: We have a huge market both at home and abroad. We have exported our cranes to many countries, especially European, Africa and so on.

A: How do you guarantee the quality?
B: We will constantly check the quality during the manufacturing process, and strictly test the equipment before shipment, and we will also send you a quality certificate.

A:What are the main products?
B: Our main products are overhead and gantry cranes. Different products have different models and application scenarios.
A:What international certifications has your company passed?

B: Our cranes has passed CE, lSO, GOST, SGS, TUV, BV, and so on.